Freezing biological products

     FEATURES NICOOL LM10

NICOOL LM 100

The samples are placed above a Dewar flask filled with liquid nitrogen. A turbine located at the top of the appliance cools down the products by gaseous convection. The speed of freezing is determined by the rotating speed of the turbine. At the end of the cycle, the samples can be immersed in the liquid nitrogen.

You will appreciate:
Easy to use.
Light and small.
low cost use.

 

           EATURES NICOOL MS21

NICOOL BAG MS 21

The straws are placed horizontally in a cabinet installed above the liquid nitrogen.
The freezing cycle is defined by 3 parameters which are entered in  the programmer regulator (temperature before seeding, temperature before immersion in liquid nitrogen and slope °C/mn between both increments).
The seeding is carried out manually. The temperature of the straws is then lowered according to the programmed slope. The freezing cycle ends up by immersion.

You will appreciate:

Its use simplicity.
Its mobility with its design like transport 's case.

NICOOL FREEZAL

    FEATURES FREEZAL


 

Cryogenic control rate freezer with intuitive programming features designed for the freezing of all types of biological samples.